Our fender seats and corner seats are made to the measurements, but we do have a small selection of ready made options available to purchase now.

Details of how to measure your fireplace are as shown below. If you can supply a photograph of your fireplace this also helps. If you find you are having any difficulty in measuring please call us on 01733 687 375, or some customers like to do a video call to go through the measurements. Please read our glossary for an explanation of terms used to describe fender seat styles, finishes & design options.

 

OR

Fill in the following on-line form. Please note: a copy of our Privacy Policy is available online.

    Type of fender required:*

    To be made in:*

    1) Is your hearth raised or flat?*
    Fender to sit on or around it?*

    2). Referencing this diagram, what are the following measurements:

    Fireplace Measurements

    What units are you using?

    A. Width

    B. Depth to wall or to fire surround (state which) on left-hand side and right-hand side

    C. Outside width of fire surround (at seat height)

    D. Skirting board thickness (if applicable)

    E. Depth of fire surround (if applicable - at seat height) on left-hand side and right-hand side

    F. Size of fire opening

    G. Hearth thickness

    3. Any other measurements: e.g. power points, gas taps etc.

    4. Total height of Fender:
    Normal height is 510mm (20 inches) but this can be varied


    * Indicates required information